Adding a Virtual Entity

Two types of virtual entities can be added to the Offline page:

■

Nodes

■

VoIP Peers

➢

To add a virtual node:

1.

In the Offline page, click and then click ; then select the virtual node type or third-party node type using the following table as reference.

Add a Virtual Node

Icon	Used to
	Drag and drop a third-party Node onto the Offline Planning page.
	Drag and drop a virtual hybrid device onto the Offline Planning page.
	Drag and drop a virtual gateway onto the Offline Planning page.
	Drag and drop a virtual SBC onto the Offline Planning page.

2.

Drag the selected type of device to the map and configure its name.

➢

To add a virtual VoIP Peer:

1.

Click and then ; then select the VoIP Peer type using the following table as reference.

Add a Virtual VoIP Peer

Icon	Used to
	Drag and drop a PSTN entity onto the Offline Planning page.
	Drag and drop a PBX onto the Offline Planning page.
	Drag and drop an IP PBX onto the Offline Planning page.
	Drag and drop a SIP Trunk onto the Offline Planning page.
	Drag and drop an IP phone onto the Offline Planning page.

2.

Drag the icon to the map and configure the name of the VoIP Peer.